Manufacturability of PLA parts reinforced with TiO2 nanoparticles by ultrasonic molding.

Macías Naranjo, Mariana

dc.contributor.advisor	Vázquez Lepe, Elisa Virginia
dc.contributor.author	Macías Naranjo, Mariana
dc.creator	VAZQUEZ LEPE, ELISA VIRGINIA; 268852
dc.date.accessioned	2021-09-25T04:32:12Z
dc.date.available	2021-09-25T04:32:12Z
dc.date.created	2020-06-16
dc.date.issued	2020-06-16
dc.identifier.citation	Macías, M. (2020) Manufacturability of PLA Parts Reinforced with TiO2 Nanoparticles by Ultrasonic Molding. (Master's thesis). Instituto Tecnológico y de Estudios Superiores de Monterrey. Recuperado de: https://hdl.handle.net/11285/639380	es_MX
dc.identifier.uri	https://hdl.handle.net/11285/639380
dc.description	268852	es_MX
dc.description.abstract	The objective of the thesis is to define and to validate a methodology for the stabilization of process parameters in ultrasonic molding and to analyze the manufacturability of PLA parts reinforced with TiO2 nanoparticles in the ultrasonic molding process. Ultrasonic molding is a new technology used for micro-part molding, reducing the necessary energy, process times, and material waste. Validating a methodology for this process, PLA was processed with TiO2 nanoparticles to observe the response of the process in this combination of materials. In addition, to observe the influence of the concentration of nanoparticles by performing the characterization to find an application in the medical sector in the future.	es_MX
dc.language.iso	eng	es_MX
dc.publisher	Instituto Tecnológico y de Estudios Superiores de Monterrey	es_MX
dc.relation.isFormatOf	versión publicada	es_MX
dc.rights	embargoedAccess	es_MX
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/4.0	es_MX
dc.subject.classification	INGENIERÍA Y TECNOLOGÍA::CIENCIAS TECNOLÓGICAS::TECNOLOGÍA E INGENIERÍA MECÁNICAS::MAQUINARIA INDUSTRIAL ESPECIALIZADA	es_MX
dc.subject.lcsh	Technology	es_MX
dc.title	Manufacturability of PLA parts reinforced with TiO2 nanoparticles by ultrasonic molding.	es_MX
dc.type	Tesis de Maestría / master Thesis	es_MX
dc.contributor.department	School of Engineering and Sciences	es_MX
dc.contributor.committeemember	Ortega Lara, Wendy de Lourdes
dc.contributor.committeemember	Rodríguez González, Ciro Angel
dc.contributor.mentor	Ferrer Real, Inés
dc.identifier.orcid	https://orcid.org/0000-0001-9825-4022	es_MX
dc.subject.keyword	Ultrasonic Molding	es_MX
dc.subject.keyword	PLA	es_MX
dc.subject.keyword	TiO2 nanoparticles	es_MX
dc.contributor.institution	Campus Monterrey	es_MX
dc.contributor.cataloger	mla, emipsanchez	es_MX
dc.description.degree	Master of Science in Manufacturing Systems	es_MX
dc.identifier.cvu	931068	es_MX
dc.audience.educationlevel	Investigadores/Researchers	es_MX
dc.relation.impreso	2020-06
dc.identificator	7\|\|33\|\|3313\|\|331327	es_MX
dc.date.embargoenddate	2023-06-30