Show simple item record

Manufacturing of Polymeric Biocompatible Cranial Geometry by Single Point Incremental Forming

dc.creatorLUIS MARCEL LOZANO SANCHEZ;375071
dc.creatorALEX ELIAS ZUÑIGA;19150
dc.creatorLUIS MARCEL LOZANO SANCHEZ;375071es
dc.creatorALEX ELIAS ZUÑIGA;19150es
dc.date2015
dc.date.accessioned2018-10-18T20:12:49Z
dc.date.available2018-10-18T20:12:49Z
dc.identifier.issn18777058
dc.identifier.doi10.1016/j.proeng.2015.12.494
dc.identifier.urihttp://hdl.handle.net/11285/630299
dc.descriptionIncremental Sheet Forming (ISF) technology is used to manufacture customized products and its application to metallic prosthesis manufacturing has been already tested. However, the use of thermoplastic sheets as raw material in ISF is still reduced and therefore the manufacturing of polymer prosthesis by this technology too. In this framework, the objective of the present paper is to obtain a real cranial geometry of a feasible prosthesis manufactured by ISF using a biocompatible polymer. The real geometry of a cranial fracture is acquired from a computer tomography and treated until get a CAD model. From it, the trajectories have been defined and the cranial geometry manufactured. © 2015 Published by Elsevier Ltd.
dc.languageeng
dc.publisherElsevier Ltd
dc.relationhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84962911390&doi=10.1016%2fj.proeng.2015.12.494&partnerID=40&md5=d59c44538fd7f9989cb65712661a138d
dc.relationInvestigadores
dc.relationEstudiantes
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0
dc.sourceProcedia Engineering
dc.subjectBiocompatibility
dc.subjectComputer aided design
dc.subjectForming
dc.subjectGeometry
dc.subjectManufacture
dc.subjectMusculoskeletal system
dc.subjectProsthetics
dc.subjectBiocompatible polymer
dc.subjectCAD modeling
dc.subjectCustomized products
dc.subjectIncremental sheet forming
dc.subjectITS applications
dc.subjectMetallic prosthesis
dc.subjectSingle point incremental forming
dc.subjectSPIF
dc.subjectPolymers
dc.subject.classification7 INGENIERÍA Y TECNOLOGÍA
dc.titleManufacturing of Polymeric Biocompatible Cranial Geometry by Single Point Incremental Forming
dc.typeConferencia
dc.identifier.volume132
dc.identifier.startpage267
dc.identifier.endpage273
refterms.dateFOA2018-10-18T20:12:49Z


Files in this item

Thumbnail
Name:
9784100.pdf
Size:
723.3Kb
Format:
PDF
View/Open

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess