Tesis

Permanent URI for this communityhttps://hdl.handle.net/11285/345119

Colección de Tesis y Trabajos de grado (informe final del proyecto de investigación, tesina, u otro trabajo académico diferente a Tesis, sujeto a la revisión y aceptación de una comisión dictaminadora) presentados por alumnos para obtener un grado académico del Tecnológico de Monterrey.

Para enviar tu trabajo académico al RITEC, puedes consultar este Infográfico con los pasos generales para que tu tesis sea depositada en el RITEC.

Browse

Search Results

Now showing 1 - 10 of 1646
  • Trabajo terminal especialidad
    Evaluación del resultado del uso profiláctico de antibióticos en madres con diagnóstico de ruptura prematura de membranas, una intervención dirigida a mejorar la morbimortalidad neonatal
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-09-04) Hernández Pérez, Josselyn; Osorio Martínez, Bronson; Martínez Longoria, César Adrián; emipsanchez; Hernández Hernández, José Ascención; López Morales, Javier; Osorio Martínez, Bronson; Escuela de Medicina y Ciencias de la Salud; Campus Monterrey; Moreno Plata, Héctor Alexandro
    Introducción: De acuerdo a cifras reportadas por el Instituto Nacional de Perinatología, en México, nacen de forma prematura alrededor de 200 mil pacientes de manera anual, cifra que a nivel mundial alcanza los 15 millones (Matos et al., 2020). Aunque la etiología es desconocida, se ha determinado la presencia de factores que incrementan el riesgo (Meller et al., 2018). De esta forma, la prematurez, constituye una causa importante de eventos adversos desfavorables en la etapa neonatal, implicados en el aumento de su morbimortalidad, asociada al desarrollo subóptimo e inmadurez de los diferentes órganos y sistemas. Las repercusiones a la salud de la madre y el recién nacido, el impacto social y emocional de las familias, el costo que implica su asistencia para los sistemas hospitalarios, hacen de esta condición clínica, un problema de interés y estudio para la salud pública. Actualmente, se han propuesto diversas estrategias obstétricas con el objetivo de prolongar el periodo de latencia, minimizar la incidencia de infección materno-fetal, reducir el riesgo de progresión de parto pretérmino y sus complicaciones asociadas (Chen et al., 2022). Objetivos: Comparar el periodo de latencia y describir la prevalencia de resultados adversos en la etapa neonatal en hijos de madres con diagnóstico de RPM, ingresadas para tratamiento antibiótico de amplio espectro VS aquellas tratadas con manejo activo, en un Hospital Privado de Tercer Nivel del Noreste de México, durante el periodo enero 2019-diciembre 2023. Determinar la asociación de marcadores de estrés oxidativo en suero materno (PCR y recuento de leucocitos) como predictores del periodo de latencia en pacientes con RPM. Métodos: La información obtenida de los expedientes clínicos, fue analizada con el programa estadístico SPSS versión 29.0 (Armonk, NY: IBM Corp). Se realizó estadística descriptiva, la cual incluyó medianas, desviaciones estándar y distribución por cuartiles para las variables de estudio continuas; para aquellas variables categóricas nominales, se utilizó la comparación de proporciones y frecuencias, efectuando el análisis estadístico, a través de la prueba Chi cuadrada o prueba exacta de Fisher para las variables cualitativas. Para el análisis de variables cuantitativas con distribución normal, se usaron pruebas paramétricas (T- Student y ANOVA); y para aquellas variables cuantitativa sin distribución normal, se aplicaron pruebas no paramétricas (U-Mann Whitney). Se calculó el OR con su intervalo de confianza al 95%. Adicionalmente se realizó un análisis de asociación entre variables y frecuencias, estableciendo diferencias estadísticamente significativas con una p<0.05. Resultados: Se incluyeron 26 participantes en el estudio, ocho tuvieron manejo activo y 18 manejo conservador. En nuestro estudio, no fue posible establecer una relación estadísticamente significativa entre el uso de antibioticoterapia y la incidencia de resultados adversos neonatales, sin embargo, fue posible determinar una asociación estadísticamente significativa entre su uso y el aumento en el periodo de latencia (p=0.01). Es posible que, al replicarse este estudio con un mayor número de muestra y muestreo probabilístico, se puedan obtener resultados diferentes que permitan concluir con mayor certeza la asociación entre sus variables. Conclusiones: Los resultados obtenidos en el presente estudio son concordantes con la literatura vigente, hoy en día. Se determinó que existe una asociación estadísticamente significativa, entre el uso de antibióticos como tratamiento de la RPM y el aumento en el periodo de latencia (p=0.01).
  • Tesis de maestría / master thesis
    Taller para Coaches de Fútbol Americano con el fin de desarrollar competencias de alto rendimiento
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-10-01) Sánchez Fischer, Carlos Enrique; Jasso Peña, Felipe de Jesús; emimmayorquin; López Flores, Iliana Enid; Escuela de Humanidades y Educación; Campus Estado de México; Gil Rendón, María Eugenia
    El objetivo principal de este proyecto fue la implementación de un taller para Coaches de fútbol americano en México, Colombia, Guatemala, Ecuador y Brasil con el fin de desarrollar competencias de alto rendimiento como el liderazgo, el control emocional, la inclusión y diversidad, la filosofía de vida y de entrenador. Se desarrollaron varios módulos para promover las competencias y que fueran adquiridas por los entrenadores. Esta intervención se llevó a cabo con dos grupos de diecisiete personas por medio de la plataforma Zoom en 6 semanas donde se utilizaron diferentes herramientas en clases teóricas y prácticas con el fin de que los entrenadores adquirieran el conocimiento y desarrollaran las habilidades del ser Coach, a su vez se describe el proceso de la investigación y sus diferentes etapas comenzando con un diagnóstico, creación y diseño del taller, su implementación e interpretación de los datos finales, destacando el incremento de la comparación de resultados del antes y después de cursar el taller en los Coaches, acentuando la adquisición de las competencias en la mayoría de los entrenadores.
  • Tesis de maestría / master thesis
    Planeación estratégica de la manufactura
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2022-11-01) Frausto Hernández, José Angel; Lopéz Soriano, Eduardo Manuel; puemcuervo, emipsanchez; Villarreal M., María Guadalupe; Escuela de Ingeniería y Ciencias; Campus Monterrey; Elizondo Gracia, Ileana
    En los ambientes de manufactura donde la demanda supera substancialmente la capacidad de producción de la empresa se requiere de un procedimiento que sea consistente en el criterio de asignación de trabajos, en este caso la maximización de la utilidad final. Los modelos temáticos edificados son similares a los del método de Transporte y Asignación de Trabajos que tradicionalmente aparecen en la literatura, pero requieren de extensiones a los algoritmos ya que no todas las máquinas pueden manufacturar todas las órdenes. La primera etapa del proyecto desarrolla un heurístico que asigna tantas órdenes de manufactura a las máquinas como sea posible dentro de las restricciones de tiempo de cada máquina asegurándose que toda orden de producción asignada se elabora completamente en una máquina en particular evitando problemas de productividad y/o calidad si se fraccionara la orden en varias máquinas. La segunda etapa genera otro heurístico que aprovecha el remanente de tiempo de las máquinas para producir parcialmente el resto de las órdenes que quedaron pendientes hasta completar el período de tiempo en cuestión. Las órdenes no contempladas se difieren para un ciclo de producción posterior. Los heurísticos se desarrollan para empresas que no cuentan con software comercial puedan realizar su asignación de trabajos en forma estratégica utilizando Excel. Ambos, son extensiones de procedimientos ya existentes dentro del área de Flujo en Redes. El heurístico de la Fase I provee una solución aproximada como cota inferior a la solución óptima mientras que el segundo heurístico siempre converge a la solución óptima.
  • Trabajo de grado, maestría / master degree work
    Deep learning for visible-infrared image fusion and semantic segmentation of wildfire imagery
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2021-11-23) Ciprián Sánchez, Jorge Francisco; Ochoa Ruiz, Gilberto; puemcuervo, emipsanchez; Martínez Carranza, José; Falcón Morales, Luis Eduardo; School of Engineering and Sciences; Campus Estado de México; Rossi, Lucile
    Wildfires stand as one of the most relevant natural disasters worldwide, particularly more so due to climate change and its impact on various societal and environmental levels. In this regard, a significant amount of research has been done to address this issue, deploying a wide variety of technologies and following a multi-disciplinary approach. Notably, computer vision has played a fundamental role in this regard. It can be used to extract and combine information from several imaging modalities regarding fire detection, characterization, and wildfire spread forecasting. In recent years there has been work on Deep Learning (DL)-based fire segmentation, showing promising results. However, it is currently unclear whether the architecture of a model, its loss function, or the image type employed (visible, infrared, or fused) has the most impact on the fire segmentation results. In the field of visible-infrared image fusion, there is a growing interest in DL-based image fusion techniques due to their reduced complexity; however, most DL-based image fusion methods have not been evaluated in the domain of fire imagery. In the present thesis, I select three state-of-the-art (SOTA) DL-based image fusion techniques, assess their performance for the specific task of fire image fusion, and compare the performance of these methods on selected metrics. I also present an extension to one of the said methods, that I called FIRe-GAN, that improves the generation of artificial infrared and fused images. I then evaluate different combinations of SOTA DL architectures, loss functions, and types of images to identify the parameters most relevant to improve the segmentation results. I benchmark them to identify the top-performing ones and compare the best one to traditional fire segmentation techniques. Finally, I evaluate if the addition of attention modules on the best-performing architecture can further improve the segmentation results. To the best of my knowledge, this is the first work that evaluates the impact of the architecture, loss function, and image type in the performance of DL-based wildfire segmentation models and assesses the applicability of DL-based image fusion methods on fire images, proposing a DL model for visible-infrared image fusion optimized for fire imagery.
  • Trabajo de grado, maestría / master degree work
    Comparison of two PCR platforms for the detection and quantification of SARS-CoV-2 RNA in sewage at institutional and country levels.
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2022-06) Garduño González, Karen Alejandra; Parra Saldívar, Roberto; puemcuervo, emipsanchez; Sosa Hernández, Juan Eduardo; Martínez Ruiz, Manuel; School of Engineering and Sciences; Campus Monterrey; Oyervides Muñoz, Mariel Araceli
    The current pandemic situation has lead to countries’ governments and institutions to the seach of affordable, time-effective tools for the identification and surveillance of pathogen’s levels across the population, in order to achieve this goals, WBE (Wastewater Based Epidemiology) has been proposed and carried out successfully in several countries. In this study, we compare two different PCR platforms, RT-qPCR and ddPCR, for the detection and quantification of SARS-CoV-2 in wastewater from Tecnológico de Monterrey’s Campus at a national level and at a Municipal level, considering various WWTPs (wastewater treatment plants). The differences between both platforms are highlighted as well as their performance. In this study RT-qPCR appears to be better-suited for the analysis of a complex matrix, in contrast ddPCR could be more useful in the early detection of the virus with clinical samples.
  • Tesis de maestría / master thesis
    Optimizing Route Planning in Diverse Landscapes: Integrating SLAM and RRT in Autonomous Drone Deployment.
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-06-11) Colín García, Daniel; Izquierdo Reyes, Javier; emimmayorquin; González Hernández, Hugo Gustavo; Molina Espinosa, José Martín; School of Engineering and Sciences; Campus Ciudad de México
    This thesis focuses on the implementation of improved route planning and terrain mapping in different types of structured landscapes by using advanced Simultaneous Localization and Mapping (SLAM) methods and Rapidly-exploring Random Tree (RRT*) algorithm in autonomous drone deployment, focusing on software development and simulation to improve tracking capabilities. This thesis is based on a single project that is a collaborative work of postgraduate students. The project aims to develop a drone-based telecommunications network that serves as a basis for exploration and monitoring in studied or designated areas. This research is based on the establishment of a system that integrates SLAM, which provides a quick and accurate map of complex environments. This is important for the correct drones' work and the best results. Meanwhile, the inclusion of an RRT algorithm enables us to raise the system's efficiency and accuracy in planning routes for drones as they navigate intricate urban and non-urban spaces. The project is exclusively based on software simulation, using tools like AirSim and Unreal Engine, which allow the creation of an environment to test how well different drones work, from a single area to specific coordinates, ignoring external conditions like weather and drone battery life. The use of these mapping techniques and this trajectory planning algorithm enables safe navigation and an understanding of the environment that allows drones to function properly to perform their tasks. The results obtained, and the methods applied in the thesis, hope to introduce efficiency and productivity in the planning of drone deployments in all structured environments. This path would open the way to new applications in areas beyond urban infrastructure.
  • Trabajo de grado, maestría / master degree work
    Performance Comparative of Impedance Controllers for a Two Degrees of Freedom Robot
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-06-06) López González, Laura Daniela; Chong Quero, Jesús Enrique; emimmayorquin; Cervantes Culebro, Héctor; Morales Méndez, Rubén; Masters of Science in Engineering; Campus Ciudad de México; Cruz Villar, Carlos Alberto
    This thesis details a new design of a physical Human-Robot Interaction platform for the flexion/extension and pronation/supination rotations of the wrist. It was intended for it to be a compact, easy to manufacture system that is comfortable for each user regardless of whether they are right or left-handed. The robot has been programmed for it to function under three different modes of operations, each employing a specific compliance based controller: impedance, admittance and impedance Maxwell-based models. In order for the three of them to be correctly compared, a study was conducted with a total of 120 people where each individual performed a series of predefined movements, displayed on a screen, using the robot. During the experiments, the torque and trajectory error were sensed and computed in order to find the average error and maximum torque for each controller. Afterwards, in order to describe the human perception of each controller, a survey was carried out and the data collected was analyzed via the Kruskal-Wallis test and a factor analysis. Finally a correlation was found between the quantitative measurements, errors and torque, and the human perception results of the survey.
  • Tesis de maestría / master thesis
    Fabrication, Characterization and Simulation of Organic Microencapsulated Phase Change Materials for Thermal Storage
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-06) Martínez Cervantes, Dannya; Otero Hernández, José Antonio; emimmayorquin; Chong Quero, Jesús Enrique; Hernández Cooper, Ernesto Manuel; Melo Máximo, Lizbeth; Bustamante, Rogelio; Escuela de Ingeniería y Ciencias; Campus Ciudad de México; Melo Máximo, Dulce Viridiana
    Phase change materials (PCMs) exhibit a physical phenomenon where a liquid-solid phase transition occurs in response to temperature changes. These materials have unique characteristics as they can release, store, and absorb energy under isothermal conditions or phase change process when it comes in contact with temperature rise or fall [3]. Currently, one of the application methods is through microencapsulation, known as core-shell. The major disadvantage of this type of system is the di↵usion of the material contained within the core shell and its spherical morphology. Therefore, this work focuses on the fabrication of a microen- capsulated system where the thickness of the outer layer and the amount of material contained can be controlled. Given the importance of using organic materials due to their environmental impact and low cost, the main components of this system are alginate and coconut oil. The method selected for encapsulation promotes the formation of spherical structures that allow for better thermal absorption distribution. The key to this was the development of a coaxial piece where, through a pump system, the volumetric flow of coconut oil and alginate was controlled. The diameters of the piece allowed for control over the size of the microen- capsulation. The results indicate the formation of PCM formed by a layer of alginate and a coconut oil core. Among the results, it is observed that the initial values of the mixture play an important role, as they can either separate or form a compound of alginate with oil. Finally, through a sensor system that records temperature changes at inter- vals, it is observed how the change in the presence of the microencapsulation is attributed to its energy absorption capacity over a thermal cycle.
  • Tesis de maestría / master thesis
    Earthquake response in mega cities: A mathematical model for the selection of relief shelters in the Valley of Mexico and a qualitative assessment for Istanbul, Turkey
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-06) Huerta De Rubín, José Gerardo; Mora Vargas, Jaime; emimmayorquin; Akhavan-Tabatabaei, Raha; Santos Borbolla, Cipriano Arturo; González Mendoza, Miguel; Escuela de Ingeniería y Ciencias; Campus Ciudad de México; Serrato García, Marco Antonio
    Natural disasters represent challenging situations globally, with earthquakes being some of the most devastating type of disasters. The difficulties to cope with them arise in contexts like mega cities, large urban agglomerations where the population dynamics make seismic disaster more struggling. In this sense, the use of humanitarian logistics techniques is an effective way to provide solutions in these contexts. In this thesis, a mathematical model is developed and used to support the selection of relief shelters from a set of potential locations. The model aims to minimize both the distances between the affected areas and the chosen shelter locations, as well as the costs of adapting the selected locations into relief shelters. The model was applied to different instances, from a small controlled one to understand and validate the way the model works, to scenarios with dimensions similar to (and even larger than) mega cities. The application of the model considered both real information gathered from a mega city in a seismic region (the Metropolitan Area of the Valley of Mexico; formed by Mexico City and several municipalities in the surrounding States of Mexico and Hidalgo), and simulated data based on the real one to face the difficulties to obtain all the required real data. Once the results were obtained for every model, a graphical tool was used to visualize them. That tool is ©QGIS, an open source Geographic Information System that allows to create maps using the resulting data from the application of the models. This visualization of results permits to identify if the results seem practical and reasonable, and represent a powerful tool to sustain the decision making after an earthquake. Finally, this work also contains a qualitative assessment of the circumstances of a different mega city with seismic danger: Istanbul, focused on a brief summary of the Istanbul Seismic Risk Mitigation and Emergency Preparedness Project (ISMEP); a document related to the way of coping with earthquakes in a different mega city located in a very seismic region.
  • Tesis de maestría / master thesis
    Proposal of a methodology for Engineering Design focused on mechatronic products for application in Mexico.
    (Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-04) Salazar Calderón, Luis Ángel; Izquierdo Reyes, Javier; emimmayorquin; Navarro Tuch, Sergio Alberto; Icaza Longoria, Inés Álvarez; Escuela de Ciencias e Ingeniería; Campus Ciudad de México
    In the face of the technological era we live in, there is a huge demand for products that improve everyday activities, from automating large-scale processes within the industry to using smart devices in people’s daily lives. Therefore, mechatronics is a privileged area for the development of such products. Due to the complexity and level of specialization required by some mechatronic systems, situations that threaten the health of these product developments may arise. Thus, having the context upon which the design of such a product will be executed can provide the design team with tools to avoid such situations. This thesis presents the development of a methodology for the engineering design process focused on mechatronic products, intended for use under Mexican conditions. The problem-solving process proposed by Hyman served as the basis, conducting a comparison with multiple methodologies focused on mechatronics as well as more traditional processes, evaluating their main qualities and the adaptation of the process itself to solve problems. The methodology was structured into three stages: Information, Conceptual Design, and Embodiment Design, aimed at adapting the steps to obtain information, generate proposals, evaluate and select a proposal, develop the proposal, and test the proposal to solve a problem. The proposed methodology was evaluated through a case study for the conceptual design of a robotic platform on the worksite, allowing for the automation of the construction of confined walls in vertical buildings in Mexico. This resulted in the mechanical and electronic development of two subsystems focused on brick transportation and another for lifting the block for subsequent placement on the wall.
En caso de no señalar algo distinto de manera particular, los materiales son compartidos bajo los siguientes términos: Atribución-No comercial-No derivadas CC BY-NC-ND http://creativecommons.org/licenses/by-nc-nd/4.0
logo

El usuario tiene la obligación de utilizar los servicios y contenidos proporcionados por la Universidad, en particular, los impresos y recursos electrónicos, de conformidad con la legislación vigente y los principios de buena fe y en general usos aceptados, sin contravenir con su realización el orden público, especialmente, en el caso en que, para el adecuado desempeño de su actividad, necesita reproducir, distribuir, comunicar y/o poner a disposición, fragmentos de obras impresas o susceptibles de estar en formato analógico o digital, ya sea en soporte papel o electrónico. Ley 23/2006, de 7 de julio, por la que se modifica el texto revisado de la Ley de Propiedad Intelectual, aprobado

DSpace software copyright © 2002-2025

Licencia